Hi-Force Hydraulic Systems

5 TON - 1100 TON Cylinders, Pumps, and Accessories

Hi-Force is the UK’s leading designer, manufacturer and supplier of hydraulic tools. Catering to a wide variety of industries, the product range comprises of over 2,000 products including hydraulic cylinders, pumps, jacks, toughlift jacking systems, torque tools, bolt tensioners, hydrotest pumps, puller kits, crimpers and cutters, nut splitters, flange spreaders and other industry related products.
  • Ultra-low height Cylinders
  • Locking Collar Cylinders
  • Wide Range of General Purpose Cylinders
  • Single Acting and Double Acting
  • Very Reliable and Quiet Electric Pumps
  • Synchronized Lifting Systems for Critical Lifts
  • Bolt Tensioners and Hydraulic Nuts
  • Lightweight Aluminum Cylinders and Pumps
  • Nut-splitters
  • Pullers
  • Proudly Made in Daventry, UK

Hi-Force is the UK’s leading designer, manufacturer and supplier of hydraulic tools. Catering to a wide variety of industries, the product range comprises of over 2,000 products including hydraulic cylinders, pumps, jacks, toughlift jacking systems, torque tools, bolt tensioners, hydrotest pumps, puller kits, crimpers and cutters, nut splitters, flange spreaders and other industry related products.

  • Ultra-low height Cylinders
  • Locking Collar Cylinders
  • Wide Range of General Purpose Cylinders
  • Single Acting and Double Acting
  • Very Reliable and Quiet Electric Pumps
  • Synchronized Lifting Systems for Critical Lifts
  • Bolt Tensioners and Hydraulic Nuts
  • Lightweight Aluminum Cylinders and Pumps
  • Nut-splitters
  • Pullers
  • Proudly Made in Daventry, UK

Ultra Low and Short Height Single Acting Cylinders

5 TON - 162 TON Cylinders | Catalog Pages 7 - 9

The HVL pancake cylinder range combines a very low closed height with a 0.24 inch stroke, providing a precise adjusting and lifting force in very confined work areas.

The HPS pad cylinder range offers the best capacity, closed height and stroke length combination, spring assisted return cylinders in the industry. Ideally suited for applications where a low closed height and maximum possible stroke is of prime importance.

  • Some of the Shortest Cylinders Available
  • Anti-extrusion seals for improved performance at high pressures
  • Nitrocarburized Piston For Excellent Corrosion Resistance
  • Working Pressure of 10,000 PSI
  • HPS and HLS are Spring Return for Quick Retracting
  • HVL Have Excellent Height to Tonnage Ratio for Very Low Height Applications
  • The base of all HVL cylinders must be fully supported during use
  • HFL Low Height Locking Collar Cylinders Available Here

Low Height Cylinders – HVL, HPS, and HLS

Model Number Capacity tons Stroke inch Oil cap. inch3 Cyl. eff. area inch2 Weight lbs
HVL Series
HVL10 11 0.24 0.55 2.23 3.5
HVL20 22 0.24 1.04 4.43 5.7
HVL30 35 0.24 1.65 7.07 6.6
HVL50 55 0.24 2.62 11.05 15.9
HVL100 115 0.24 5.37 22.71 34.4
HPS Series
HPS50 5 0.24 0.24 0.99 1.8
HPS51 5 0.63 0.61 0.99 2
HPS100 11 0.39 0.85 2.23 3.5
HPS200 22 0.43 1.89 4.43 5.7
HPS300 35 0.47 3.36 7.07 9.3
HPS500 55 0.59 6.53 11.05 14.6
HPS750 80 0.63 10 15.92 22.9
HPS1000 120 0.63 14.95 23.78 51.1
HPS1500 162 0.63 20.13 31.96 62.8
HLS Series
HLS101 11 1.58 3.54 2.23 5.3
HLS201 22 1.73 7.69 4.43 10.6
HLS301 35 0.99 6.95 7.07 11
HLS302 35 2.36 16.71 7.07 15.4
HLS501 55 0.99 10.86 11.05 18.5
HLS502 55 2.36 26.11 11.05 22.9
HLS1001 120 0.99 23.42 23.78 43.7
HLS1002 120 2.36 56.18 23.78 52.9
HLS1501 162 0.99 31.48 31.96 81.6
HLS1502 162 1.97 62.89 31.96 92.6

General Purpose Single Acting Cylinders

5 TON - 120 TON | Catalog Page 10

The HSS single acting multi-purpose cylinder range offers the widest choice of stroke lengths and lifting capacities available, and provides an excellent choice for maintenance, production, fabrication and construction applications. All models are provided with a collar thread and thread protector, cylinder base and piston rod mountings for easy fixturing, making the HSS range the most versatile and adaptable multi-purpose cylinders available.

– Anti-extrusion seals for improved performance at high pressures
– Nitrocarburized Piston For Excellent Corrosion Resistance
– Working Pressure of 10,000 PSI
– Base Mounting Holes
– Customized and special design cylinders are available on request
– Spring Assisted Return from Quick Retraction
Aluminum Lightweight Options Available

General Purpose – HSS

Model Number Capacity tons Stroke inch Oil cap. inch3 Cyl. eff. area inch2 Weight lbs
HSS51 5 0.99 0.98 0.99 2.2
HSS52 5 1.97 1.95 0.99 2.6
HSS53 5 2.96 2.93 0.99 3.1
HSS54 5 3.94 3.9 0.99 3.3
HSS55 5 4.93 4.88 0.99 4
HSS57 5 6.93 6.89 0.99 4.4
HSS59 5 8.98 8.91 0.99 5.3
HSS101 11 0.99 2.2 2.23 4
HSS102 11 2.21 4.94 2.23 5.3
HSS104 11 3.94 8.78 2.23 6.6
HSS106 11 5.91 13.24 2.23 9.3
HSS108 11 8.12 18.12 2.23 11
HSS1010 11 9.85 22.02 2.23 11.9
HSS1012 11 12.02 26.84 2.23 13.7
HSS152 16 1.97 6.16 3.15 7.5
HSS154 16 3.94 12.38 3.15 11
HSS156 16 5.91 18.54 3.15 14.6
HSS1510 16 9.85 30.93 3.15 19.4
HSS252 27 2.01 10.86 5.41 14.3
HSS254 27 4.02 21.72 5.41 17.6
HSS256 27 5.91 31.96 5.41 21.2
HSS258 27 8 43.25 5.41 21.2
HSS2510 27 9.85 53.31 5.41 27.8
HSS2514 27 14.03 75.76 5.41 37
HSS2518 27 18.01 97.42 5.41 47.2
HSS308 32 8.08 52.46 6.49 41
HSS502 55 2.01 22.2 11.05 28.7
HSS504 55 4.02 44.41 11.05 37
HSS506 55 5.99 66.12 11.05 44.1
HSS508 55 8.08 88.33 11.05 51.1
HSS5013 55 13.01 143.59 11.05 74.1
HSS756 80 5.99 95.22 15.92 68.3
HSS1004 120 4.02 95.47 23.78 91.7
HSS1006 120 6.03 143.17 23.78 109.8
HSS10010 120 10.01 237.66 23.78 144.4

Hollow Through Hole Single and Double Acting Cylinders

5 TON - 162 TON Cylinders | Catalog Pages 11, 12

The HHS single acting and HHR double acting hollow piston cylinder range are extremely versatile for use in tooling, maintenance and tensioning applications. Specifically designed with a hollow piston to enable a rod or cable to be passed through the entire cylinder length for applications where a pulling force is required, the HHS range is used extensively in post-tensioning and pre-stressing applications as well as testing of various bonded or mechanical anchoring systems. HHS and HHR cylinders can also be used for general lifting applications, when fitted with readily available interchangeable hardened steel piston rod saddles.

– Anti-extrusion seals for improved performance at high pressures
– Nitrocarburized Piston For Excellent Corrosion Resistance
– Working Pressure of 10,000 PSI
– HHS Single Acting and HHR Double Acting
– Customized and special design cylinders are available on request
– HHS Spring Assisted Return from Quick Retraction
Aluminum Lightweight Options Available

 Hollow Through Hole – HHS and HHR

Model Number Capacity tons Stroke inch Oil cap. inch3 Cyl. eff. area inch2 Weight lbs
HHS Single Acting Hollow Hole
HHS101 12 0.99 2.38 2.45 6.2
HHS102 12 1.97 4.82 2.45 6.6
HHS106 12 5.99 14.64 2.45 22.5
HHS202 25 1.97 10.19 5.16 15.4
HHS206 25 5.91 30.5 5.16 30.4
HHS302 36 1.97 14.21 7.24 23.4
HHS306 36 5.99 43.31 7.24 42.3
HHS603 67 2.99 39.71 13.28 61.7
HHS606 67 5.91 78.39 13.28 89.5
HHS1003 112 2.99 66.37 22.18 141.1
HHS1006 112 5.91 130.97 22.18 165.3
HSS108 11 8.12 18.12 2.23 11
HSS1010 11 9.85 22.02 2.23 11.9
HSS1012 11 12.02 26.84 2.23 13.7
HSS152 16 1.97 6.16 3.15 7.5
HSS154 16 3.94 12.38 3.15 11
HSS156 16 5.91 18.54 3.15 14.6
HSS1510 16 9.85 30.93 3.15 19.4
HSS252 27 2.01 10.86 5.41 14.3
HSS254 27 4.02 21.72 5.41 17.6
HSS256 27 5.91 31.96 5.41 21.2
HSS258 27 8 43.25 5.41 21.2
HSS2510 27 9.85 53.31 5.41 27.8
HSS2514 27 14.03 75.76 5.41 37
HSS2518 27 18.01 97.42 5.41 47.2
HSS308 32 8.08 52.46 6.49 41
HSS502 55 2.01 22.2 11.05 28.7
HSS504 55 4.02 44.41 11.05 37
HSS506 55 5.99 66.12 11.05 44.1
HSS508 55 8.08 88.33 11.05 51.1
HSS5013 55 13.01 143.59 11.05 74.1
HSS756 80 5.99 95.22 15.92 68.3
HSS1004 120 4.02 95.47 23.78 91.7
HSS1006 120 6.03 143.17 23.78 109.8
HSS10010 120 10.01 237.66 23.78 144.4
HHR Double Acting Hollow Hole
Model Number Push Tons Pull Tons Stroke Oil cap. inch3 Cyl. eff. area inch2 Weight lbs
HHR302 36 26 2.01 14.52 7.24 26.9
HHR306 36 26 5.91 42.76 7.24 38.8
HHR3012 36 26 12.02 86.86 7.24 56.7
HHR603 67 42 2.99 39.77 13.28 67.5
HHR606 67 42 5.99 79.54 13.28 91.7
HHR6010 67 42 10.01 132.92 13.28 112.7
HHR1003 112 47 2.99 66.31 22.18 151
HHR1006 112 47 5.99 132.61 22.18 198.4
HHR1508 167 78 8 263.52 32.98 374.8
HHR2508 272 84 8 429.38 53.71 593

Aluminum Single Acting, Double Acting, Locking Collar, and Hollow Hole Cylinders

20 TON - 121 TON Cylinders | Catalog Pages 16 - 19

HAS, HHA, HFA, and HRA lightweight, aluminum cylinders is specifically designed for applications where weight and ease of positioning are features of prime importance. With an average weight of approximately 50% of comparable capacity steel construction cylinders, all models are supplied with a hard anodized, wear resistant, piston rod and cylinder body and a steel cylinder base protection plate.

– Anti-extrusion seals for improved performance at high pressures
– Hard Anodized Piston Rod and Cylinder
– Working Pressure of 10,000 PSI
– HAS Single Acting (Steel Options Available)
– HHA Hollow Hole (Steel Options Available)
– HFA Locking Collar (Steel Options Available)
– HRA Double Acting (Steel Options Available)
– Customized and special design cylinders are available on request
– HAS and HHA Spring Assisted Return from Quick Retraction
– Steel Base Plate to Protect Cylinder Body
Aluminum Pumps Available

 Aluminum Cylinders – HAS, HHA, HFA, and HRA

Model Number Capacity tons Stroke inch Oil cap. inch3 Cyl. eff. area inch2 Weight lbs
HSS51 5 0.99 0.98 0.99 2.2
HSS52 5 1.97 1.95 0.99 2.6
HSS53 5 2.96 2.93 0.99 3.1
HSS54 5 3.94 3.9 0.99 3.3
HSS55 5 4.93 4.88 0.99 4
HSS57 5 6.93 6.89 0.99 4.4
HSS59 5 8.98 8.91 0.99 5.3
HSS101 11 0.99 2.2 2.23 4
HSS102 11 2.21 4.94 2.23 5.3
HSS104 11 3.94 8.78 2.23 6.6
HSS106 11 5.91 13.24 2.23 9.3
HSS108 11 8.12 18.12 2.23 11
HSS1010 11 9.85 22.02 2.23 11.9
HSS1012 11 12.02 26.84 2.23 13.7
HSS152 16 1.97 6.16 3.15 7.5
HSS154 16 3.94 12.38 3.15 11
HSS156 16 5.91 18.54 3.15 14.6
HSS1510 16 9.85 30.93 3.15 19.4
HSS252 27 2.01 10.86 5.41 14.3
HSS254 27 4.02 21.72 5.41 17.6
HSS256 27 5.91 31.96 5.41 21.2
HSS258 27 8 43.25 5.41 21.2
HSS2510 27 9.85 53.31 5.41 27.8
HSS2514 27 14.03 75.76 5.41 37
HSS2518 27 18.01 97.42 5.41 47.2
HSS308 32 8.08 52.46 6.49 41
HSS502 55 2.01 22.2 11.05 28.7
HSS504 55 4.02 44.41 11.05 37
HSS506 55 5.99 66.12 11.05 44.1
HSS508 55 8.08 88.33 11.05 51.1
HSS5013 55 13.01 143.59 11.05 74.1
HSS756 80 5.99 95.22 15.92 68.3
HSS1004 120 4.02 95.47 23.78 91.7
HSS1006 120 6.03 143.17 23.78 109.8
HSS10010 120 10.01 237.66 23.78 144.4

Locking Collar Failsafe Low Height and Standard Height Single Acting Cylinders

55 TON - 573 TON Cylinders | Catalog Pages 14, 15

The HFG and HFL single acting failsafe lock ring cylinder ranges combines all the versatility and efficiency of hydraulic power with the safety of mechanical load support. Ideally suited for applications requiring sustained load holding for extended periods, such as bridge support work, the HFG and HFL ranges features a single acting, load return piston, threaded throughout its stroke length to suit the threaded mechanical load holding lock ring. Simply jack up the load, wind down the mechanical lock ring until it comes into contact with the cylinder body, release the hydraulic pressure and sustain the load mechanically. All models are suitable for vertical lifting only and are supplied with tilting saddles as standard to reduce the risk of side loading the cylinder.

– Anti-extrusion seals for improved performance at high pressures
– Mechanical Locking Ring Allows Full Load Support after Removing All Hydraulic Pressure
– Load Return
– Working Pressure of 10,000 PSI
– HFL Low Height Models
– HFG Standard Height Models
– Customized and special design cylinders are available on request
– Nitrocarburized Piston For Excellent Corrosion Resistance
– Overstroke Restrictor Port to Over Extension of Cylinder
Aluminum Lightweight Options Available

Locking Collar – HFG and HFL

Model Number Capacity tons Stroke inch Oil cap. inch3 Cyl. eff. area inch2 Weight lbs
HFL Low Height Locking Collar
HFL502 55 2.01 21.96 11.05 31.3
HFL1002 120 1.97 46.99 23.78 55.3
HFL1502 167 1.77 65.29 33.22 97
HFL2002 224 1.77 86.65 44.19 125.2
HFL2502 287 1.77 100.69 56.75 153
HFL4002 439 1.77 153.18 86.65 266.8
HFL5002 573 1.77 200.77 113.13 410.1
HFG Standard Height Locking Collar
HFG502 55 2.01 21.97 11.05 35.7
HFG504 55 4.02 44.55 11.05 45.4
HFG506 55 5.91 65.3 11.05 55.1
HFG1002 120 2.01 46.38 23.78 77.2
HFG1004 120 3.94 93.37 23.78 104.7
HFG1006 120 5.91 140.35 23.78 135.6
HFG1502 167 2.01 65.3 33.22 172
HFG1504 167 3.94 130.6 33.22 185.2
HFG1506 167 5.91 195.87 33.22 197.3
HFG2002 224 1.97 86.65 44.19 210.3
HFG2006 224 5.99 264.23 44.19 302
HFG2506 282 5.99 335.65 56.81 377
HFG3006 359 5.91 419.26 70.94 503.8
HFG4006 439 5.95 515.07 86.65 680.1
HFG5006 573 5.99 677.36 113.13 1007.5
HFG8006 892 5.99 1066.15 175.79 1620.4
HFG10006 1115 5.99 1318.8 220 2239.9

Hand Powered, Electric, and Gasoline Single and Double Acting Pumps

Wide Variety of Flow Rates to Meet Your Cylinder Needs - from 5 TONS to 1100 TONS | Catalog Page 27

The HP manually operated aluminum and steel pump range offers two speed operation and all models are supplied complete with a pre-filled oil reservoir, ready for immediate use. All models have a maximum working pressure of 10000 PSI and the range includes pump models suitable for use with either single or double acting cylinders and tools.
The HEP electric pump ranges offer single and double acting multi-stage pumps that support 120, 220, 380, and 440 volt applications. The HEP ranges splits into multiple subranges to accommodate specific customer needs – such as the HEP103 range for compact size and smaller cylinder use cases. The HEP2 general duty medium flow pumps for larger and even double acting cylinders – or the HEP3 and HEP5 pumps for general and heavy duty high flow applications. There are more options than could be listed here so reference page 27 in the catalog for more pump information. ***link to Catalog PDF***
Special applications may make use of the HSP split flow pump for individual or synchronous cylinder control on up to 8 cylinders – or the SLF Synchronous Lifting System for applications that need extremely precise and computer controlled lift and lowering applications.

– Aluminum Lightweight Single and Double Acting Hand Pumps
– Steel Single and Double Acting Hand Pumps
– HEP1 Lightweight Mini Electric Pump
– HEP103 Compact Electric Pump Series
– HEP2 General Duty Medium Flow Single an Double Acting
– HEP3 and HEP5 General and Heavy Duty High Flow Single and Double Acting
– Synchronous Lifting and Splitflow HSP and SLF Pumps

For more information regarding Hi-Force’s wide variety of pump offerings – check out page 27 of the catalog. ***link to the Catalog PDF***

Double Acting and High Tonnage Cylinders

28 TON - 1,115 TON Cylinders | Catalog Pages 13, 20, and 21

The HDA double acting cylinder range offers the utmost in versatility and durability. Specifically designed for heavy duty lifting, construction and maintenance applications as well as presswork and industrial production, the double acting design provides substantial pulling force in the piston retraction mode as well as providing fast, controlled retraction for continuous duty cycle operation.
The HGG range of load return industrial cylinders is specifically designed for lifting and maintenance applications. These single acting cylinders are supplied with a tilting saddle to reduce risks of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.
The HSG single acting load return construction cylinders are ideally suited for construction, civil engineering, heavy fabrication and maintenance applications. These cylinders are supplied with a tilting saddle fitted as standard and have a stroke limitation device incorporated for safety.

– Extremely High Tonnage Cylinders
– Anti-extrusion seals for improved performance at high pressures
– Nitrocarburized Piston For Excellent Corrosion Resistance
– Working Pressure of 10,000 PSI
– Anti-Extrusion Seals for Improved Performance at High Pressures
– HGG and HSG Single Acting Cylinders
– HDA Double Acting Cylinders

High Tonnage - HDA, HGG, and HSG

Model Number Push Tons Pull Tons Stroke in. Oil cap. inch3 Cyl. eff. area inch2 Weight lbs.
HDA Double Acting
HDA256 27 11 5.99 32.34 5.41 33.1
HDA506 55 16 5.99 65.91 11.05 62.6
HDA5013 55 16 13 143.41 11.05 93.9
HDA5020 55 16 20.02 220.91 11.05 138.4
HDA1006 120 40 5.99 142.18 23.76 142.2
HDA10013 120 40 13 308.78 23.76 196.2
HDA1506 167 87 5.99 198.94 33.2 198.4
HDA15012 167 87 12.02 398.48 33.2 265.7
HDA2006 224 104 5.99 364.23 44.21 286.2
HDA20012 224 104 12.02 530.3 44.21 369.1
HDA3006 359 5.99 424.11 70.9 425.5
HDA30012 359 12.02 851.28 70.9 551.2
HDA4006 439 5.99 518.09 86.63 630.5
HDA40012 439 12.02 1039.84 86.63 853.2
HDA5006 573 5.99 676.75 113.13 820.1
HDA50012 573 12.02 1358.39 113.13 1042.8
HDA8006 892 5.99 1054.49 175.79 1433
HDA10006 1115 5.99 1319.33 220 1984.1
Model Number Capacity tons Stroke inch Oil cap. inch3 Cyl. eff. area inch2 Weight lbs
HGG Single Acting Load Return
HGG1506 168 6.11 202.59 33.22 128.5
HGG2006 224 6.11 282.54 44.19 210.1
HGG3006 359 6.11 433.27 70.94 338.4
HSG Single Acting Load Return
HSG1506 168 5.99 195.88 33.22 170.9
HSG2006 224 5.99 264.84 44.19 237.4
HSG3006 359 5.99 426.56 70.94 386.2
 

Hydraulic Bolt Tensioners and Hydraulic Nut Leave-On Tensioners

3/4" - 4" Bolt Diameters | Catalog Page 103

Hi-Force carries a very versatile set of tensioners. The STS imperial bolt tensioner range is designed for topside operation in a wide variety of applications including pipeline flanges, heat exchangers, pressure vessels, compressor covers, boiler feed pumps, anchor bolts and many others. The SBT imperial range of hydraulic bolt tensioners, offers all of the features and benefits of our standard STS range, but with the added feature of spring assisted return hydraulic pistons. Hi-Force STU series sub-sea bolt tensioners are designed and manufactured to suit the demanding requirements of divers operating in harsh sub-sea environments.
The Hi-Force HTN range of imperial top collar hydraulic nuts is specifically designed and manufactured for applications where regular, periodic opening of the joint, for inspection and maintenance purposes is required. Unlike conventional hydraulic bolt tensioners, Hi-Force HTN series hydraulic nuts are designed to permanently replace standard hexagon nuts, on one side of the bolted joint. Initially the bolt tension or elongation is applied hydraulically and once achieved, it is permanently retained via the integral mechanical load retaining collar.

– Customized and special design tensioners are available on request
– Available in Imperial and Metric
– Visible maximum piston stroke indicator
– Nitrocarburized Piston For Excellent Corrosion Resistance
– Working Pressure of 21,750 PSI
– Dual quick connect couplings for easy connection
– STS and SBT Hydraulic Tensioners
– STU Subsea Tensioners
– HTN Hydraulic Nut Leave-On Tensioners
– Manual HPX-BTU Tensioner Hand Pumps
– Pneumatic AHP-BTU Tensioner Pumps

Tensioners, Hydraulic Nuts, and Pumps – STS, SBT, STU, HTN, HPX and AHP

Model Bolt Diameter Pressure PSI Tons Imperial and Metric?
Tensioners
SBT Spring Return Series 1 ¼” to 4″ 21750 51.4 to 297.6 Yes
STS Manual Return Series ¾” to 4″ 21750 26.3 to 297.6 Yes
STU Subsea Series 1″ to 3½” 21750 28.8 to 279 Yes
Hydraulic Nut Leave-On Tensioners
HTN Series 1″ to 4″ 21750 22.3 to 214.8 Yes
See more info on Catalog Page 103

ToughLift Integrated Axle Jack and Material Hauler Lifting System

55 - 220 TONS | Catalog Page 74

The Hi-Force ToughLift jacking system offers users the easiest and safest method of lifting material haulers in the mining and construction industry and locomotives in the railway industry, when critical maintenance and breakdown repair work is required. Suitable for lifting even the largest earth haulers in the world, the Hi-Force ToughLift is available in 55, 110, 165 and 220 ton lifting capacities.

– Choice of air or electric driven hydraulic system
– High speed 3-stage pump unit offers faster advance and retract times, both under load and no load
– Integral airline filter, lubricator and pressure regulator unit on air driven models.
– Solid tires fitted as standard with option of pneumatic tires
– Working Pressure of 10,000 PSI
– Lifting heights up to 27 inches
– Narrow width wheels and redesigned wheel position for better ground clearance and balance when manoeuvring
– Push button remote hand pendant controller with 16.5 foot control cable
– Tilting saddles fitted as standard on all models
– Wide range of accessories available for even greater versatility

ToughLift - TL Series

Model Number Capacity tons Power Supply Stroke inch Weight lbs Max Additional Stack inch
TLA5010 55 90 psi air driven 10.01 352.7 26.79
TLA5014 55 90 psi air driven 13.99 374.8 26.79
TLE5010-110V 55 110V electric, 50 Hz 10.01 370.4 26.79
TLE5010-120V 55 120V electric, 60 Hz 10.01 370.4 26.79
TLE5010 55 230V electric, 50 Hz 10.01 370.4 26.79
TLE5010H 55 220V electric, 60 Hz 10.01 370.4 26.79
TLE5014-110V 55 110V electric, 50 Hz 13.99 374.8 26.79
TLE5014-120V 55 120V electric, 60 Hz 13.99 374.8 26.79
TLE5014 55 230V electric, 50 Hz 13.99 374.8 26.79
TLE5014H 55 220V electric, 60 Hz 13.99 374.8 26.79
TLA10016 110 90 psi air driven 15.96 637.1 18.91
TLA10021 110 90 psi air driven 20.88 703.3 7.09
TLA15015 165 90 psi air driven 15.37 690 19.11
TLA15020 165 90 psi air driven 20.49 769.4 7.09
TLA20015 220 90 psi air driven 15.01 822.3 19.7
TLA20027 220 90 psi air driven 27 998.7 7.09
 

The Hi-Force product line contains even more than what we could list here – included but not limited to:

– Toe Jacks
– Pullers
– Nut-Splitters
– Pneumatic Foot Pumps
– Spreaders
– Bottle Jacks
– Gauges, Hoses, Fittings, Manifolds, and Other Accessories
– Press Units
– Find Dimensions and Extra Specifications
– Accessories of all Kinds and more!
Check out the catalog below or call with any questions!
***link to Catalog PDF***

Call Now

Already Have Cylinders or Pumps that need Service?

Click here to Setup a Pickup!

Need a rental?

Click here to call and check availability and set it up!!

Call Now